Line-up

Cell model G Series

Flexible adaption to variations in production

Cell model F25G type

Cell model F25G type

● Covers honing diameter from φ3 to φ40 and length up to 80mm
● Flexibly combined to adopt to the application

Combining three cells as required for the application improves the added value of honing machines

Since the cells are modular units, they can be added to expand or alter your previously installed equipment,
creating completely new honing machines.

  • Loading cells are units used for loading the product to the process. Manual and automatic types are available, and the types are interchangeable with each other. Loading cells can be provided with an unloading mechanism.

  • Return cells are units used for returning the product to the loading position. They are used with a manual loading cell or an automatic loading cell with an unloading mechanism. Unloading cells are units used for unloading the product. Different types are available to match the flow of the preceding and subsequent processes.

Cell model honing machines can be freely combined to adapt to the application

Since the cells are modular units, they can be added to expand or alter your previously installed equipment, creating completely new honing machines.

Honing cell combination

Add honing cells to reduce honing time, improve honing precision




Using altered manual/automatic equipment


Dividing equipment for use on other lines

Improve the productivity of other lines by varying production volumes


Specifications

Specification F25G
Number of honing spindle 1-spindle 2-spindle
Honing range Diameter φ3~φ40
Length 80mm
Driving method For spindle rotation Servo motor
Spindle speed Usable RPM range 1~3,000rpm (Timing belt)
Spindle stroke Speed Maximum 40m/min
Stroke Max. stroke range 200mm
Min. setting 0.01mm
Stone expansion Expansion method Fixed amount expansion
Expansion amount Min. setting 0.01μm/1 expansion
Number of honing program 30 kinds
Machine weight 2,000kg 2,500kg
Machine size Width 785mm 1,285mm
Depth 2,190mm 2,135mm
Overall height 2,100mm 2,100mm

The maximum speed shown is not supported for some honing length and honing conditions.
The length can be honed is limited by the honing precision requirement.
Contact us for more information. These specifications are subject to change without prior notice for product improvement.

Standard model G50 type

Specifications

Specification F50G
Number of honing spindle 1-spindle 2-spindle
Honing range Diameter φ4~φ100
Length 130mm
Driving method For spindle rotation Servo motor
Spindle speed Usable RPM range 1~3,000rpm (Timing belt)
Spindle stroke Speed Maximum 30m/min
Stroke Max. stroke range 300mm
Min. setting 0.01mm
Stone expansion Expansion method Fixed amount expansion
Expansion amount Min. setting 0.01μm/1 expansion
Number of honing program 30 kinds
Machine weight 2,000kg 3,000kg
Machine size Width 785mm 1,285mm
Depth 2,190mm 2,135mm
Overall height 2,230mm 2,230mm

The maximum speed shown is not supported for some honing length and honing conditions.
The length can be honed is limited by the honing precision requirement.
Contact us for more information. These specifications are subject to change without prior notice
for product improvement.

Other machines

N-KASTRON

N-KASTRON

Toss! - Caked sludge
Save! - Labor saving by full automatic
Reduce! - Industrial waste

N-KASTRON
Easy to treat!

Please
contact us

TEL +81-772-62-8088
Department in charge Sales Department
Person in charge  Dohi
E-mail
PageTop